Ireland's Largest Christmas Store!

If you are working out how to hang garland on stairs, the job is easier than it looks, and most of the work happens before anything goes up. Measure first, choose pre-lit or unlit, and decide how you will fix it without marking the paint or the wood. The same thinking applies to a mantel, so this guide covers both, with the measuring, the fixings and the power question in the order you will meet them.

Measure the banister before you buy

Garlands are sold by length, so start with a tape measure. Run it along the top of the handrail from the first post to the last, following the slope, not the straight line along the floor. Write the number down.

Then decide how you want it to sit:

Our unlit garlands come in 6ft (180cm) and 9ft (275cm) lengths, so a short flight might take one 6ft piece, while a longer one can join several 9ft lengths end to end. A join is easy to hide under a bow or a bunch of berries.

Width matters as much as length. The 9ft x 14 Inch Winchester Pine Garland with Wider Feel Real Tips is 14 inches across, which gives a fuller look on a wide, open staircase. A narrower garland suits a slim banister better and is easier to keep tidy on a tight turn.

Measure the mantel

For a mantel, measure the front edge from end to end. If you want the garland to drape down at each side, add the drop on both ends. A 9ft garland typically covers a mantelpiece with draping, while a 6ft garland fits shelves or narrow spaces. For a standard fireplace, one 9ft garland is a good starting point.

Leave room for the rest of the display. Candles, a mirror, stockings and ornaments all need space on a mantel, so a garland that hangs lower at the sides keeps the top clear. If you want a wreath above the fireplace, our unlit wreaths page suggests “36 inches (92cm) or our 127cm wreath” for a position above a fireplace.

Pre-lit or unlit?

A pre-lit garland has the lights fitted already. The pre-lit garlands range comes “with warm white LED lights already fitted, so there’s nothing to wind on”. That saves the fiddly part of the job.

An unlit garland gives you more control. The unlit garlands come in styles including “realistic pine and cedar, frosted tips, eucalyptus or glittering decorative garlands”. You choose the lights, so you can match the glow to the rest of the room. If you are unsure which shade suits, our post on warm white versus classic warm lights explains the difference.

A rough guide:

If you like the look of berries, cones or sparkle but want something simpler, the decorative garlands are described as working well for “mantels, staircases, doorways, and more”.

Battery or mains on the stairs?

Stairs are rarely next to a socket, which is why battery power is popular here. The 9ft Pre-Lit Arlington Garland has 100 warm white rice LEDs and is battery-operated, so it can go on a banister without a lead trailing across the hall. Our pre-lit garlands page says most are 9ft (275cm) long and battery operated, which means you can hang them on a mantel, banister or door frame with no socket nearby.

Mains power suits a spot where a socket is close, such as a fireplace with a socket beside it. The 9ft Feel Real Bayberry Spruce Pre-Lit Mains Powered Christmas Garland has 70 warm white LED lights and a timer function.

Think about where the battery pack will sit. On a banister, tuck it behind a bow or against a post so it can be reached when the batteries need changing. Before you put anything up, test the lights on the floor, so you do not find a fault when the garland is already fixed in place.

If you would rather add your own lights to an unlit garland, our battery lights range lets you light a staircase without a socket either.

Fixing a garland without damage

Rented homes and freshly painted hallways call for a gentle approach. A few options:

Fix at the highest point first, then work along the rail, fluffing the tips as you go. Separate the branches by hand until the garland looks full, then step back and check it from the bottom of the stairs, since that is the angle most people will see.

Finishing touches

Once the garland is up, add ribbon, ornaments or sprigs of berries to fill gaps. If you want a matching feature at the front door, the pre-lit wreaths come with 50 to 200 warm white LEDs, and most run on batteries.

FAQ

How many garlands do I need for a staircase?

Measure the handrail along its slope, then decide whether you want it straight or swagged. Swags use more length. Join 9ft lengths together for a long flight.

What is the best way to attach garland to a banister?

Soft ties or covered wire around the rail and spindles are the usual choice, and they come off cleanly after Christmas. Removable hooks work on walls.

Should I choose a battery or a mains garland for the stairs?

Battery suits most staircases because there is rarely a socket close by. Mains suits a mantel with a socket nearby.

How long is a garland for a mantel?

A 9ft garland covers a standard mantel with a drape at each end.